What a z-score tells you
A z-score (also called a standard score) says how far a value sits from the mean, measured in standard deviations. A z-score of 0 is exactly average. A z-score of 1.5 is one and a half standard deviations above the mean. A z-score of −2 is two standard deviations below it.
Because every z-score uses the same scale, you can compare results that were measured in different ways: a maths test marked out of 100 and an English test marked out of 80, or a height in centimetres and a weight in kilograms.
The z-score formula
Here x is the value, μ (mu) is the mean and σ (sigma) is the standard deviation. If you work from a sample, the same formula is often written z = (x − x̄) ÷ s.
To go the other way, from a z-score back to a raw value:
Step by step
- Subtract the mean from the value. The answer is positive for values above the mean and negative for values below it.
- Divide by the standard deviation. The result is the z-score.
- To turn it into a probability or percentile, find the area under the standard normal curve to the left of z, written Φ(z). Multiply by 100 for the percentile.
Worked examples
Example 1: a test score above the mean. A class test has a mean of 70 and a standard deviation of 10. You scored 85.
- z = (85 − 70) ÷ 10 = 15 ÷ 10 = 1.5
- Φ(1.5) = 0.9332, so about 93.32% of scores are lower than yours: roughly the 93rd percentile.
- The right tail, P(Z > 1.5) = 1 − 0.9332 = 0.0668, so only about 6.7% scored higher.
Example 2: a score below the mean. Same test, a score of 62.
- z = (62 − 70) ÷ 10 = −0.8
- Φ(−0.8) = 1 − Φ(0.8) = 1 − 0.7881 = 0.2119, about the 21st percentile.
Example 3: the area between two values. What share of students scored between 60 and 85?
- z₁ = (60 − 70) ÷ 10 = −1 and z₂ = 1.5
- P(−1 < Z < 1.5) = Φ(1.5) − Φ(−1) = 0.9332 − 0.1587 = 0.7745, about 77%.
Example 4: from a percentile back to a score. What score puts a student in the top 10%, the 90th percentile?
- The z with 0.90 to its left is 1.2816.
- x = 70 + 1.2816 × 10 = 82.82, so a score of about 83 or more.
Example 5: comparing two tests. Ali scored 85 in maths (mean 70, SD 10) and 78 in English (mean 66, SD 6). Maths gives z = 1.5; English gives z = (78 − 66) ÷ 6 = 2.0. The English result is the stronger one relative to the class, even though the raw mark is lower.
Left tail, right tail, between and two-tailed
The calculator shows every common area at once. Pick the one that matches your question:
| Question | Area | Formula |
|---|---|---|
| What share is below x? (percentile) | Left tail | Φ(z) |
| What share is above x? | Right tail | 1 − Φ(z) |
| What share is between x₁ and x₂? | Between | Φ(z₂) − Φ(z₁) |
| How likely is a result this far from the mean, in either direction? | Two-tailed | 2 × Φ(−|z|) |
| What share is within ±z of the mean? | Middle | 1 − 2 × Φ(−|z|) |
The two-tailed area is the p-value for a two-sided z-test. The right tail on its own is the p-value for a one-sided test where the alternative is “greater than”.
Common critical values
These are the z-values used for confidence intervals and significance tests. Use Z from a percentile with the Middle area to get any other level.
| Confidence level (two-sided) | α | Critical z |
|---|---|---|
| 80% | 0.20 | ±1.2816 |
| 90% | 0.10 | ±1.6449 |
| 95% | 0.05 | ±1.9600 |
| 98% | 0.02 | ±2.3263 |
| 99% | 0.01 | ±2.5758 |
| 99.9% | 0.001 | ±3.2905 |
For one-sided tests, α = 0.05 needs z = 1.6449 and α = 0.01 needs z = 2.3263.
The familiar 68–95–99.7 rule comes from the same curve: 68.27% of a normal population lies within one standard deviation of the mean, 95.45% within two and 99.73% within three.
Z table (positive z-scores)
A z table lists Φ(z), the area to the left of z. Find the row for the first decimal of z and the column for the second. For z = 1.96, go to row 1.9 and column .06: 0.9750. For a negative z, use Φ(−z) = 1 − Φ(z). For example, Φ(−1.96) = 1 − 0.9750 = 0.0250.
| z | .00 | .01 | .02 | .03 | .04 | .05 | .06 | .07 | .08 | .09 |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.0 | 0.5000 | 0.5040 | 0.5080 | 0.5120 | 0.5160 | 0.5199 | 0.5239 | 0.5279 | 0.5319 | 0.5359 |
| 0.1 | 0.5398 | 0.5438 | 0.5478 | 0.5517 | 0.5557 | 0.5596 | 0.5636 | 0.5675 | 0.5714 | 0.5753 |
| 0.2 | 0.5793 | 0.5832 | 0.5871 | 0.5910 | 0.5948 | 0.5987 | 0.6026 | 0.6064 | 0.6103 | 0.6141 |
| 0.3 | 0.6179 | 0.6217 | 0.6255 | 0.6293 | 0.6331 | 0.6368 | 0.6406 | 0.6443 | 0.6480 | 0.6517 |
| 0.4 | 0.6554 | 0.6591 | 0.6628 | 0.6664 | 0.6700 | 0.6736 | 0.6772 | 0.6808 | 0.6844 | 0.6879 |
| 0.5 | 0.6915 | 0.6950 | 0.6985 | 0.7019 | 0.7054 | 0.7088 | 0.7123 | 0.7157 | 0.7190 | 0.7224 |
| 0.6 | 0.7257 | 0.7291 | 0.7324 | 0.7357 | 0.7389 | 0.7422 | 0.7454 | 0.7486 | 0.7517 | 0.7549 |
| 0.7 | 0.7580 | 0.7611 | 0.7642 | 0.7673 | 0.7704 | 0.7734 | 0.7764 | 0.7794 | 0.7823 | 0.7852 |
| 0.8 | 0.7881 | 0.7910 | 0.7939 | 0.7967 | 0.7995 | 0.8023 | 0.8051 | 0.8078 | 0.8106 | 0.8133 |
| 0.9 | 0.8159 | 0.8186 | 0.8212 | 0.8238 | 0.8264 | 0.8289 | 0.8315 | 0.8340 | 0.8365 | 0.8389 |
| 1.0 | 0.8413 | 0.8438 | 0.8461 | 0.8485 | 0.8508 | 0.8531 | 0.8554 | 0.8577 | 0.8599 | 0.8621 |
| 1.1 | 0.8643 | 0.8665 | 0.8686 | 0.8708 | 0.8729 | 0.8749 | 0.8770 | 0.8790 | 0.8810 | 0.8830 |
| 1.2 | 0.8849 | 0.8869 | 0.8888 | 0.8907 | 0.8925 | 0.8944 | 0.8962 | 0.8980 | 0.8997 | 0.9015 |
| 1.3 | 0.9032 | 0.9049 | 0.9066 | 0.9082 | 0.9099 | 0.9115 | 0.9131 | 0.9147 | 0.9162 | 0.9177 |
| 1.4 | 0.9192 | 0.9207 | 0.9222 | 0.9236 | 0.9251 | 0.9265 | 0.9279 | 0.9292 | 0.9306 | 0.9319 |
| 1.5 | 0.9332 | 0.9345 | 0.9357 | 0.9370 | 0.9382 | 0.9394 | 0.9406 | 0.9418 | 0.9429 | 0.9441 |
| 1.6 | 0.9452 | 0.9463 | 0.9474 | 0.9484 | 0.9495 | 0.9505 | 0.9515 | 0.9525 | 0.9535 | 0.9545 |
| 1.7 | 0.9554 | 0.9564 | 0.9573 | 0.9582 | 0.9591 | 0.9599 | 0.9608 | 0.9616 | 0.9625 | 0.9633 |
| 1.8 | 0.9641 | 0.9649 | 0.9656 | 0.9664 | 0.9671 | 0.9678 | 0.9686 | 0.9693 | 0.9699 | 0.9706 |
| 1.9 | 0.9713 | 0.9719 | 0.9726 | 0.9732 | 0.9738 | 0.9744 | 0.9750 | 0.9756 | 0.9761 | 0.9767 |
| 2.0 | 0.9772 | 0.9778 | 0.9783 | 0.9788 | 0.9793 | 0.9798 | 0.9803 | 0.9808 | 0.9812 | 0.9817 |
| 2.1 | 0.9821 | 0.9826 | 0.9830 | 0.9834 | 0.9838 | 0.9842 | 0.9846 | 0.9850 | 0.9854 | 0.9857 |
| 2.2 | 0.9861 | 0.9864 | 0.9868 | 0.9871 | 0.9875 | 0.9878 | 0.9881 | 0.9884 | 0.9887 | 0.9890 |
| 2.3 | 0.9893 | 0.9896 | 0.9898 | 0.9901 | 0.9904 | 0.9906 | 0.9909 | 0.9911 | 0.9913 | 0.9916 |
| 2.4 | 0.9918 | 0.9920 | 0.9922 | 0.9925 | 0.9927 | 0.9929 | 0.9931 | 0.9932 | 0.9934 | 0.9936 |
| 2.5 | 0.9938 | 0.9940 | 0.9941 | 0.9943 | 0.9945 | 0.9946 | 0.9948 | 0.9949 | 0.9951 | 0.9952 |
| 2.6 | 0.9953 | 0.9955 | 0.9956 | 0.9957 | 0.9959 | 0.9960 | 0.9961 | 0.9962 | 0.9963 | 0.9964 |
| 2.7 | 0.9965 | 0.9966 | 0.9967 | 0.9968 | 0.9969 | 0.9970 | 0.9971 | 0.9972 | 0.9973 | 0.9974 |
| 2.8 | 0.9974 | 0.9975 | 0.9976 | 0.9977 | 0.9977 | 0.9978 | 0.9979 | 0.9979 | 0.9980 | 0.9981 |
| 2.9 | 0.9981 | 0.9982 | 0.9982 | 0.9983 | 0.9984 | 0.9984 | 0.9985 | 0.9985 | 0.9986 | 0.9986 |
| 3.0 | 0.9987 | 0.9987 | 0.9987 | 0.9988 | 0.9988 | 0.9989 | 0.9989 | 0.9989 | 0.9990 | 0.9990 |
| 3.1 | 0.9990 | 0.9991 | 0.9991 | 0.9991 | 0.9992 | 0.9992 | 0.9992 | 0.9992 | 0.9993 | 0.9993 |
| 3.2 | 0.9993 | 0.9993 | 0.9994 | 0.9994 | 0.9994 | 0.9994 | 0.9994 | 0.9995 | 0.9995 | 0.9995 |
| 3.3 | 0.9995 | 0.9995 | 0.9995 | 0.9996 | 0.9996 | 0.9996 | 0.9996 | 0.9996 | 0.9996 | 0.9997 |
| 3.4 | 0.9997 | 0.9997 | 0.9997 | 0.9997 | 0.9997 | 0.9997 | 0.9997 | 0.9997 | 0.9997 | 0.9998 |
The calculator does not need the table: it works out Φ(z) directly to about 15 significant digits, so it also gives exact answers for z-scores with more decimals and for tiny tail areas beyond z = 3.5.
Common mistakes
- Dividing by the variance. The formula uses the standard deviation σ, not the variance σ². If you only have the variance, take its square root first.
- Reading the wrong tail. Most z tables give the area to the left. For “more than” questions, subtract from 1.
- Mixing up sample and population SD. If you work the SD out from a sample, use the sample version (n − 1). The data option in the calculator lets you choose.
- Assuming any data is normal. Percentiles from z-scores are only accurate when the data is roughly bell-shaped. For skewed data such as incomes, the z-score is still a valid distance from the mean, but the percentile may be off.
- Forgetting the sign. A value below the mean must give a negative z-score. A positive answer for a below-average value means the subtraction was the wrong way round.
Don’t have the mean and standard deviation yet? Paste your numbers into the standard deviation calculator or the mean, median and mode calculator, or use the Work them out from data option above. To turn a percentile into a percentage of a total, try the percentage calculator. Everything is calculated in your browser and nothing is uploaded.