How this mic test works
When you press Test microphone, your browser asks for permission and opens the microphone with getUserMedia, the same feature video-call websites use. The sound then goes into the Web Audio API, which measures it dozens of times a second on your own device. Nothing is sent to a server: the meter, waveform and frequency bars are all drawn in the page.
- Level meter: how loud the input is right now, in decibels relative to the loudest sound the microphone can deliver (dBFS). 0 dB is the ceiling. The thin line shows the most recent peak.
- Waveform: the raw shape of the sound. A flat line means silence; speech looks like bursts of tight wiggles.
- Frequency bars: how much sound there is at each pitch, low on the left and high on the right. Speech fills mostly the left half.
- Sound detected: switches to Yes when the level rises above normal room noise.
- 5-second playback: records a short clip with MediaRecorder and plays it back, so you can hear what other people hear. The clip stays in this tab and is never uploaded.
When you press Stop test or leave the page, the microphone is released and the recording light on your device goes out.
Reading your result
| Result | What it means | What to do |
|---|---|---|
| Your microphone is working | Clear sound is reaching the browser | Check the level and listen to the playback |
| Very quiet | Some sound arrives, but very little | Move closer, speak up or raise the input volume |
| We cannot hear anything | Only near-silence after several seconds | Check the selected microphone, mute switches and cables |
| No sound at all | The signal is exact digital silence | The input is almost certainly muted in hardware or in system settings |
| Too loud | The peak is close to 0 dB | Move back or lower the input volume to avoid distortion |
For speech at a normal distance, aim for the meter to sit around the middle (roughly −30 to −12 dB on this meter) with peaks that stay out of the red. Quiet rooms and good headsets often read lower than you expect; that is fine as long as the playback sounds clear.
Call-style processing. Tick the box to turn on the noise suppression, echo cancellation and automatic volume that video calls use. Leave it off to hear what the microphone itself picks up. If the meter jumps when processing is on, automatic volume is lifting quiet sounds.
Microphone not working? Start here
Work down this list; most problems are solved by one of the first four steps.
- Allow the microphone in the browser. If you clicked Block by mistake, see the browser steps below.
- Allow the browser in your operating system. Windows and macOS have their own microphone switches. The browser can be allowed while the system still blocks it.
- Pick the right microphone. After you allow access, the list under the meter shows every microphone the browser can see. Laptops often default to the built-in mic even when a headset is plugged in.
- Check mute switches. Many headsets have a mute button or a mic boom that mutes when raised, USB microphones often have a mute button, and some laptops have a microphone mute key.
- Close apps that hold the microphone. Zoom, Teams, Discord, OBS and other recorders can lock it. Quit them and test again.
- Unplug and plug back in, or try a different USB port. Then restart the browser.
- Open the page in a normal browser. Browsers built into social media and chat apps frequently block the microphone.
Allow the microphone in your browser
Chrome and Edge on a computer
- Click the site information icon at the left end of the address bar, then switch Microphone on (or choose Allow), and reload the page.
- To see blocked sites and the default device: Chrome menu (⋮) → Settings → Privacy and security → Site settings → Microphone. You can also type
chrome://settings/content/microphonein the address bar. In Microsoft Edge, useedge://settings/content/microphone.
Firefox
- Click the microphone or permissions icon in the address bar and clear the Blocked permission, then reload.
- For all sites: menu (☰) → Settings → Privacy & Security → Permissions → Microphone → Settings….
Safari on a Mac
- Choose Safari → Settings (called Preferences on older versions) → Websites → Microphone, find this site and set it to Allow or Ask.
- If Safari never shows a prompt, check the macOS privacy setting below.
Fix microphone settings on your device
Windows 11
- Privacy: Start → Settings → Privacy & security → Microphone. Turn on Microphone access, Let apps access your microphone and Let desktop apps access your microphone. Chrome, Edge and Firefox count as desktop apps, so the last switch matters.
- Input device and volume: Settings → System → Sound → Input. Choose your microphone, then open it to set the input volume and use Start test.
- Microphone busy: Settings → System → Sound → More sound settings → Recording tab → select the microphone → Properties → Advanced. If another program holds the microphone, untick Allow applications to take exclusive control of this device. The Levels tab on the same window sets the volume and, on some devices, a microphone boost.
Windows 10
- Privacy: Settings → Privacy → Microphone. Turn on Allow apps to access your microphone and Allow desktop apps to access your microphone.
- Input device: Settings → System → Sound. Under Input, choose your microphone and use Device properties to set its volume.
macOS
- Privacy: Apple menu → System Settings → Privacy & Security → Microphone, and switch on your browser. On macOS Monterey and earlier: System Preferences → Security & Privacy → Privacy → Microphone. Quit and reopen the browser afterwards.
- Input device and volume: System Settings → Sound → Input. Select the microphone, speak and watch the input level; drag Input volume up if it barely moves.
iPhone and iPad
- Safari: in iOS 18 and later, open Settings → Apps → Safari → Microphone and choose Ask or Allow. In iOS 17 and earlier it is Settings → Safari → Microphone.
- For this site only: in Safari, tap the page menu button at the left of the address bar and choose Website Settings → Microphone.
- Chrome or another browser: Settings → Apps (iOS 18 and later) → the browser → switch Microphone on. On older iOS versions, the browser is listed directly in Settings.
- Phone calls and FaceTime take over the microphone. End the call before testing.
Android
- Chrome: tap ⋮ → Settings → Site settings → Microphone, and make sure this site is not blocked.
- System permission: Settings → Apps → Chrome → Permissions → Microphone → Allow only while using the app. Menu names vary slightly between phone makers.
- Microphone access switch: Android 12 and later has a Microphone access tile in Quick Settings (swipe down from the top). If it is off, every app gets silence.
Error messages explained
| Message | Usual cause | Fix |
|---|---|---|
| Microphone access is blocked | You, or a system setting, denied permission | Allow it in the browser, then in Windows or macOS privacy settings |
| No microphone found | Nothing is plugged in or the device is disabled | Connect a microphone, or enable it in system sound settings |
| The microphone is busy | Another app has exclusive use of it, or a driver problem | Close call and recording apps; on Windows, untick exclusive control; restart the browser |
| That microphone is not available | The chosen device was unplugged | Pick another microphone or System default |
| This page cannot use the microphone here | The page is not on https, or it is inside a frame or app that blocks it | Open the page directly in a normal browser |
| The microphone stopped | The device was disconnected or access was withdrawn mid-test | Reconnect it and press Test microphone again |
Headsets, Bluetooth and USB microphones
- Most Bluetooth headsets and earbuds switch to a lower-quality hands-free mode while their microphone is in use, so music sounds worse during a call. That is normal. On Windows, a Bluetooth headset can appear twice: the microphone belongs to the entry named as a headset or hands-free device.
- USB microphones usually have a gain knob and a mute button on the body. If the meter stays flat, check both.
- XLR microphones connect through an audio interface. Condenser microphones need 48V phantom power switched on at the interface, and the interface’s input gain must be turned up.
- Wired headsets with one 3.5 mm plug need a combined headphone and mic socket. On a computer with separate pink and green sockets, a splitter is required.
Related tools
Once your microphone sounds right, record narration or voice notes with the voice recorder, or capture a tutorial with your voice using the screen recorder. To cut silence from a recording, use the audio trimmer.